The patented Tile Easy ceramic tile system has been designed with lots for features.
A 2-step installation process that gives perfect alignment with no lippage everytime.
It’s so easy just about anyone call install it.
Each tile in the Tile Easy ceramic tile system is a piece of modern technology and is made up of two key components.
The patented cradle bases with very strong interlocking “click together” tabs (see below) and state of the art composite reinforcement for our porcelain tiles.
Very flexible, very strong, and has been developed to be the best interlocking floating modular tile Flooring system on the market
The core of our tile Flooring system is what makes Tile Easy system so easy to install
Each reinforced porcelain tile sits within the injection moulded cradle that has very strong snap fittings on all four sides. These snap fittings not only simplify the install process but they automatically and position each tile accurately to each other with no lippage.
A narrow thin line joint in between each tile is achieved
The tile tray base has a neoprene sound reducing cushioning embedded negating the need for extra underlay costs and labour to install.
The Tile Easy ceramic tile system achieves the highest noise AAAC reduction rating ….6 Stars.
Tile Easy ceramic tile system has been designed to give the best impact performance of any modular floating porcelain tile system. The H.I.R. is the result of an integration process that we have developed between state-of-the-art composites polymer reinforcement material and a real porcelain tile.
The Tile Easy ceramic tile system achieved a result of just under 6mm deflection with a point load of over 300kg over 600mm span before cracking.
This is really ground breaking result and setting the bar for modular floating porcelain tile systems
Our Tile Easy flooring tile system is complemented by our equally easy to apply grouting system.
We offer two different grouting systems
Tile Easy – grout
Tile Easy - Strip grout
Our very fast flexible grout system is specially formulated for our Tile Easy flooring tile system.
Once the tiles are laid, apply the grout using the applicator dispenser, cartridge & nozzle.
Not like traditional wet grouting applications we have made this normally difficult and messy task much easier. No more water, no more sponge rinsing and wiping, and no more hours on your knees washing the Flooring afterwards.
Apply Tile Easy-Grout using the applicator gun, cartridge, and nozzle.
Once applied to joint, use spoon to smooth and peel off when dry.
Yes…it is that easy!!
The strip grout is a polymer extrusion strip specially designed to be hard pressed into the joints with our applicator and is held in place with strong interference fit.
The extremely tight fit also creates a watertight seal in the joints.
The top of Tile Easy – Strip Grout extrusion will protrude the top surface of the tiles, this is then trimmed off to leave a perfect grout joint.
Every industry has its own requirements and challenges. Click through the tiles below for some of the ways the Tile Easy system makes tiling easy within different use cases.
